Tools
and
Supplies
This
page is just to show you what my saw looks like, and give you a better
look at the chains I use.
Tools:
All coins are "Hand Cut"
with a Jewelers saw. These are not manufactured, or made with a machine
in any way.
If you look real close, you will see the
blade in the picture. There are many sizes of Jewlers Sawblades. I normally
use a 3/0, 4/0, or 5/0 blade. The small ball thing you see in the picture
is "Bees Wax" to lubricate the sawblade while cutting.
This is the custom made cutting bench
I use to cut the coins. The Vise has a "V" shape to hold the coins, and
is foot pedal operated. I use a swivel chair to get in and out easily.
There is shelves for various tools and drills, as well as places to hang
all other supplies I need for making a necklace. It is a very efficient
setup.
This is a picture of me cutting coins
at my bench.
Supplies:
All coins cut by me include
a "free" necklace, or keychain.
When I cut a coin for you, I will give
you a "free" necklace or keychain with your purchase. My charge is basically
for the work involved in cutting the coins.
When ordering, you have a choice
of one of the following pictured below:
1) Fine Cobra, Silver Plate, 18" chain
2) Medium Curb, Basemetal, 18"chain
3) White Snake Keychain
4) I also offer a Serpentine chain (not
pictured).
5) I have gold plated 18" chains, for
Gold Dollar designs. (not pictured)
*Longer
chains available in medium curb only
1
2 3
 
1
2
3
EXAMPLES OF OUR ARTWORK-
All Hand Cut with a Jewelers Saw
    
    
All Coin Designs
Copyright 1986 - 2002
By: Gary V. Ambrose II
|
[Tools and Supplies
Page for: Hand Cut Coins]
